TMA8C

Make Almost Any Configuration Part, Including Milling, Drilling, Tapping, Compound Angle Work, Turning, Boring, and Threading - From barstock or automatically (optional) loaded slugged stock.

Tsugami introduced the most practical mill/drill machine the "Mercury" twenty years ago, and produced thousands. The TMA8 now followed by the new TMA8-II are a logical technological step, introducing a duty rated mill - 5-Axis, integral to a full featured lathe.

The TMA Series addresses customer needs for a higher precision, large toolchanger, multiple "C" axis machine allowing the same complexity of work on the back and side of a part customarily reserved for front-working only.

Key Advantages

• High Speed Automatic Tool Changer Included: Tool to tool time is 0.8 seconds.
• Bar Capable: The TMA8 works equally well with bar fed or chucked material.
• Powerful Milling: 5.5 hp milling spindle removes metal quickly.
• High Accuracy: Positioning repeatability is +/- 0.001mm
• Wide Machining Range: C model can machine in 6 face planes.

Key Features:

• Max Work Diameter: 220 mm (8.66")
• Max Bar Diameter: 65 mm (2.56")
• Max Work Length: 580 mm (22.83")
• Main Spindle Speed: 5,000 rpm
• Tool Spindle Speed: 10,000 rpm
• Tool Storage Capacity: 30 ATC standard (60 pieces optional)

For More Information:

Contact Us!
Contact Your Local Distributor