B0123-II - 12 mm, 3-Axis Opposed Gang Tool Automatic Lathe
Experience the Tsugami performance difference in an economically priced 3-axis convertible opposed gang tool lathe. The B0 family of machines is configured to match your 12 mm and 20 mm manufacturing requirements – delivering Tsugami precision, accuracy, and performance in exactly the configuration and machine you need. Use the B0123-II for traditional 12 mm Swiss turning or for making parts smaller than 3:1 L/D ratio in chucker mode (optional conversion kit needed).
Legendary Tsugami Precision in a Basic 3-Axis Swiss Type Lathe
Experience legendary Precision Tsugami speed, accuracy, and precision at minimal investment cost with the 12 mm B0123-II Swiss style automatic lathe. This 3-axis turning center is a basic, but high performing, Swiss style lathe that features Tsugami’s time-tested sliding headstock technology – the fastest and most efficient way to cut small parts.
Although economically priced, the B0123-II lathe is packed full of features, including; Tsugami’s gang type tool post, 12,000 rpm main spindle speed, and offers 9 OD tool positions and 4 rotary tool positions for flexible 3-axis machining.
The B0123-II is CONVERTIBLE and may be run as a traditional sliding headstock Swiss turn, using the guide bushing or run without the guide bushing with the addition of an optional chucker kit. When run as a chucker, the lathe can use drawn bar stock instead of centerless ground stock, dramatically reducing remnant size and increasing shop flexibility.
|Maximum Bar Stock||12 mm / 0.5″|
|Sliding Headstock / Guide Bushing||YES|
|CONVERTIBLE: Run w/o Guide Bushing (chucker)||YES|
|Max Headstock Stroke w/ Guide Bushing
Max Headstock Stroke w/o Guide Bushing
45 mm, 1.77”
|# Tool Positions (std / max)||13|
|# Live Tool Positions (std / max)||4|
|Main Spindle Speed||200 – 12,000 rpm|
|Sub Spindle Speed||–|
|Live Tool Speed||8,000 rpm|
|Main Spindle Motor||1.5 / 2.2 kW|
|Weight||3307 lbs., 1,500 kg|
|Footprint: W x D x H||64.5” x 40.7” x 66.9”; 1,640 × 1,035 × 1,700 mm|
Basic, Dependable 3-Axis Swiss Style Lathe at minimal investment cost
13 Tool Positions – 9 OD and 4 Rotary
170 mm Stroke, 45 mm when used in chucker mode
Rapid Traverse Rate of 32 m/min– shortens idle, cycle times
Enriched NC Functions Standard – tool nose radius compensation, chamfering and corner rounding, and cut0off detection, plus many more…
Fanuc 0i-TD CNC Control
- Cross Rotary Tool
- Chucker Kit
- Direct-Drive Guide Bushing
- Cross Rigid Tap