B0124-II - 12 mm, 4-Axis Opposed Gang Tool Automatic Lathe
Experience the Tsugami performance difference in an economically priced, enhanced 4-axis convertible opposed gang tool lathe. Use the Tsugami B0124-II for traditional 12 mm Swiss turning or for machining parts smaller than 3:1 L/D ratio in chucker mode (optional conversion kit needed).
Tsugami High Performance, Economical Price, 4-Axis Swiss Type Lathe
The Tsugami B0124-II Swiss Style Automatic Lathe uses the same rugged framework as the B0123-II, but adds a back spindle and 4 fixed tools to the configuration. This 4-axis turning center has basic back spindle capabilities along the Z2-axis and is able to eliminate many secondary operations. This convertible Swiss style lathe features Tsugami’s time-tested sliding headstock technology – the fastest and most efficient way to cut small parts.
Economically priced like other B0 machines, the B0124-II turning center includes many high-end features such as Tsugami’s gang type tool post, rigid cast iron frame, robust 12,000 rpm main and sub-spindle speed and a full NC package. This CNC automatic lathe offers a total of 17 tool positions: 9 OD tool positions and 8 fixed positions for flexible 4-axis machining.
The Tsugami B0124-II is CONVERTIBLE and may be run as a traditional sliding headstock Swiss Style Lathe using the guide bushing or run without the guide bushing with the addition of an optional chucker kit. When run as a chucker the turning center can use drawn bar stock instead of centerless ground stock, dramatically reducing remnant size and increasing shop flexibility.
|Maximum Bar Stock||12 mm / 0.5″|
|Sliding Headstock / Guide Bushing||YES|
|CONVERTIBLE: Run w/o Guide Bushing (chucker)||YES|
|Max Headstock Stroke w/ Guide Bushing
Max Headstock Stroke w/o Guide Bushing
|210 mm, 8.26”
45 mm, 1.77”
|# Tool Positions (std / max)||17|
|# Live Tool Positions (std / max)||4|
|Main Spindle Speed||200 – 12,000 rpm|
|Sub Spindle Speed||200 – 12,000 rpm|
|Live Tool Speed||8,000 rpm|
|Main Spindle Motor||1.5 / 2.2 kW|
|Weight||3,086 lbs., 1,400 kg|
|Footprint: W x D x H||64.5” x 40.7” x 66.9”; 1,640 × 1,035 × 1,700 mm|
- Enhanced 4-axis Swiss Style Lathe at minimal investment cost
- Back Spindle Capability – Spindle plus 4 fixed tool positions
- 17 Total Tool Positions – 9 OD + 4 fixed front and 4 fixed rear
- 170 mm Stroke, 45 mm when used in chucker mode
- Rapid Traverse Rate of 32 m/min – shortens idle and cycle times
- Enriched NC Functions Standard – tool nose radius compensation, chamfering and corner rounding and cutoff detection, plus many more…
- Fanuc 0i-TD CNC Control