B0325B-II - 32 mm, 5-Axis Opposed Gang Tool CNC Lathe
Swiss Turning Performance, Job Shop 5-Axis Flexibility. The 32 mm versions of the Tsugami B0 family of CNC lathes begin with this rugged, high performing 5-axis, 27-tool (std) machine. Generous standard features include those not typically found on an economically priced Swiss turn. This convertible opposed gang tool lathe is a solid performer in the B0 series. Use the B0325B-II for traditional 32 mm Swiss turning or for making parts smaller than 3:1 L/D ratio in chucker mode (optional conversion kit needed).
Swiss Turning Performance, Job Shop 5-Axis Flexibility
The B0325B, 32 mm, 5-axis Swiss Type Lathe is the basic building block for the 32 mm Swiss turn category in the B0 family. But even this “basic” model comes loaded with high end performance features. A 4-Spindle Cross Rotary Tool is standard on the front tool post and a deep hole drill holder (up to 100 mm length) is standard next to the back spindle.
The B0325B-II includes Tsugami’s gang type tool post, rigid cast iron frame and 8,000 rpm main spindle speed. This CNC automatic lathe offers 27 tool positions in standard configuration, 39 in optional configuration. The tool zone makes it easy to change rotary tools, ID holders and turning holders.
The Tsugami B0325B-II is CONVERTIBLE and may be run as a traditional sliding headstock Swiss Type Lathe using the guide bushing or run without the guide bushing with the addition of an optional chucker kit. When run as a chucker the lathe can use drawn bar stock instead of centerless ground stock, dramatically reducing remnant size and increasing shop flexibility.
|Maximum Bar Stock||32 mm / 1.26″|
|Sliding Headstock / Guide Bushing||YES|
|CONVERTIBLE: Run w/o Guide Bushing (chucker)||YES|
|Max Headstock Stroke w/ Guide Bushing
Max Headstock Stroke w/o Guide Bushing
|320 mm / 12.6”
70 mm / 2.75”
|# Tool Positions (std / max)||26/31|
|# Live Tool Positions (std / max)||4/8|
|Main Spindle Speed||200 – 8,000 rpm|
|Sub Spindle Speed||200 – 8,000 rpm|
|Live Tool Speed||6,000 rpm|
|Main Spindle Motor||3.7 / 5.5 kW|
|Weight||3,500 kg / 7,716 lbs.|
|Footprint: W x D x H||2,150× 1,280× 1,930 mm
84.6″ x 50.3″ x 75.9″
- Enhanced 5-axis Swiss Style Lathe at minimal investment cost
- 27 Tool Positions Standard, Optional 39: Combination of rotary tools, ID holders and turning holders
- Additional Tool Post Beside Back Spindle – Deep Hole Drilling capability up to 100 mm
- Optional Rotary Tool Position – Back Spindle
- 320 mm Stroke, 70 mm when used in chucker mode
- Rapid Traverse Rate of 32 m/min – shortens idle and cycle times
- Fanuc 32i-B CNC
- Rear Drive Rotary Tool
- Back Rotary Tool
- Rotary Tool Beside Back Spindle
- Chucker Kit
- Cross Rigid Tap
- Back Rigid Tap
Tsugami Custom Tooling is a full service machine tool shop specializing in the design, manufacture, and delivery of custom machine tool accessories.
For all tooling inquiries please contact:
Ph: (860) 687-3527
Cell: (860) 422-3297
e-mail: [email protected]