B075 - 7 mm, 5-Axis Opposed Gang Tool Lathe
Experience the Tsugami performance difference in an economically priced, enhanced 5-axis convertible opposed gang tool lathe. Use the B075-III for traditional 7mm Swiss style manufacturing or for making parts smaller than 3:1 L/D ration in “chucker” mode (optional conversion kit needed).
Legendary Tsugami Precision, 15,000 rpm Main Spindle
The B075-III uses the same rugged framework as B0123-II but adds a back spindle and four fixed tools to the configuration. This 5-axis machine has back spindle capabilities along the Z2-axis and is able to eliminate many secondary operations. This convertible Swiss style lathe features a very high speed main spindle (15,000rpm) and sub spindle (12,000). High speed is essential for precision in micro-machining small parts.
In this model, the toggle is replaced with Tsugami’s unique chuck mechanism which provides exceptional balance and improved roundness. Ceramic ball bearings contribute to a stable surface finish and increased tool life.
Also economically priced like other B0 machines, the B075-III does feature Tsugami’s gang type tool post, rigid cast iron structural base, 12,000 rpm main and sub spindle speed and offers a total of 17 tool positions: 9 OD tool positions and 8 fixed positions for flexible 5-axis manufacturing. A large capacity chip pan enables unmanned operation for long periods.
The B075-III is CONVERTIBLE and may be run as a traditional sliding headstock machine using the guide bushing or run without the guide bushing with the addition of an optional chucker kit. When run as a “chucker”, the machine can use drawn bar stock instead of centerless ground stock, dramatically reducing remnant size and increasing shop flexibility.
|Maximum Bar Stock||7mm|
|Sliding Headstock / Guide Bushing||YES|
|CONVERTIBLE: Run w/o Guide Bushing (chucker)||YES|
|Max Headstock Stroke w/ Guide Bushing
Max Headstock Stroke w/o Guide Bushing
|170 mm, 6.69”
|# Tool Positions (std / max)||17|
|# Live Tool Positions (std / max)|
|Main Spindle Speed||200 – 15,000 rpm|
|Sub Spindle Speed||200 – 12,000 rpm|
|Live Tool Speed|
|Main Spindle Motor||1.5 hp / 2.2 kW|
|Weight||3,747 lbs., 1,700 kg|
|Footprint: W x D x H||64.5” x 40.7” x 66.9”; 1,035× 1,585 × 1,700mm|
- Enhanced 4-axis Swiss Style Lathe at minimal investment cost
- Unique Toggle, Ceramic Ball Bearings improve balance, roundness, surface finish and tool life
- Back Spindle Capability – Spindle plus 4 Fixed Tool Positions
- 17 Total Tool Positions – 9 OD + 4 Fixed (Front) + 4 Fixed (Rear)
- 170mm Stroke, 45mm when used in “chucker” mode
- Rapid Traverse Rate of 32m/min – shortens idle and cyle times
- Enriched NC Functions Standard – tool nose radius compensation, chamfering and corner rounding, and cutoff detection, plus many more…
- Fanuc 0i-TD CNC
- Cross Rotary Tool
- “Chucker” Kit
- Direct-Drive Guide Bushing
- Cross Rigid Tap