B0204-II - 20 mm, 4-Axis Opposed Gang Tool CNC Lathe
Experience the Tsugami performance difference in this economically priced, enhanced 4-axis convertible opposed gang tool CNC lathe. Use the B0204-II for traditional 20mm Swiss turning or for making parts smaller than 3:1 L/D ratio in chucker mode (optional conversion kit needed).
Tsugami High Performance, Affordable, 4-Axis Swiss Type Lathe
The Tsugami B0204-II Swiss Type Lathe uses the same rugged framework as the B0123-II but adds a back spindle and 4 fixed tools to the configuration. This 4-axis CNC lathe has basic back spindle capability along the Z2-axis and is able to eliminate many secondary operations. This convertible Swiss style lathe features Tsugami’s proven sliding headstock technology – the fastest and most efficient way to cut small parts.
Economically priced like other B0 machines, the B0204-II includes many high end features such as Tsugami’s gang type tool post, rigid cast iron frame, robust 12,000 rpm main and sub spindle speed and a full NC package. This CNC automatic lathe offers a total of 17 tool positions: 9 OD tool positions and 8 fixed positions for flexible 4-axis manufacturing.
The B0204-II is CONVERTIBLE and may be run as a traditional sliding headstock Swiss Type Lathe using the guide bushing or run without the guide bushing with the addition of an optional chucker kit. When run as a chucker, the turning center can use drawn bar stock instead of centerless ground stock, dramatically reducing the remnant size and increasing shop flexibility.
Maximum Bar Stock | 20 mm |
# Axes | 4 |
Sliding Headstock / Guide Bushing | YES |
CONVERTIBLE: Run w/o Guide Bushing (chucker) | YES |
Max Headstock Stroke w/ Guide Bushing Max Headstock Stroke w/o Guide Bushing |
170 mm / 6.69” 45 mm / 1.77” |
# Tool Positions (std / max) | 17 |
# Live Tool Positions (std / max) | 4 |
Control | FANUC 0i-TD |
Main Spindle Speed | 200 – 10,000 rpm |
Sub Spindle Speed | 200 – 12,000 rpm |
Live Tool Speed | |
Main Spindle Motor | 2.2 / 3.7 kW |
Weight | 1,700 kg / 3,747 lbs. |
Footprint: W x D x H | 64.5” x 40.7” x 66.9”; 1,640 × 1,035 × 1,700 mm |
- Economically priced Enhanced 4-axis Swiss Type Lathe
- Back Spindle Capability – Spindle plus 4 fixed tool positions
- 17 Total Tool Positions – 9 OD + 4 fixed front and 4 fixed rear
- 170 mm Stroke, 45mm when used in chucker mode
- Rapid Traverse Rate of 32 m/min – shortens idle and cycle times
- Enriched NC Functions Standard – tool nose radius compensation, chamfering and corner rounding, and cutoff detection, plus many more…
- Fanuc 0i-TD CNC Control
- Cross Rotary Tool
- Chucker Kit
- Direct-Drive Guide Bushing
- C-Axis
- Cross Rigid Tap