Home » Testimonials

Testimonials

Hartwig Testimonial: Smith Precision Products

Challenge: Keep up with demand and also yield a great finish on the fasteners
Machining Solution: M08SY and B0325
Result: Increase Throughput by 7X
Location: Broken Arrow, OK
Read More...

RTI Surgical Increases Productivity with Tsugami Machines

Challenge: The need for innovation and decreased cycle times
Machining Solution: S206, SS38MH-5AX and others
Result: Shortened Cycle Times and Increased Productivity
Location: Marquette, MI
Read More...

Thomas W. Springer

Challenge: Miniature fitting in 316L material with 16 RMS finish in a cone that tapers to Ø.021 and a Ø.010 through hole
Machining Solution: Tsugami S206
Result: Can drill a .009 inch hole at 10,000 RPM in 316L SST for thousands of parts and bore down to .021 inch diameter
Location: Landenberg, PA
Read More...

Radax Industries: Investment Leads to Greater Capabilities

Challenge: Needed a flexible machine, capable of running unattended and creating the companies small parts
Machining Solution: BE20, S206, B0326, B0206, SS26, SS20
Result: Customer satisfaction consistently registering 4.8 out of 5.0 and the ability to archieve tolerances as tight as ±0.0005" for concentricity and ±0.0005
Location: Webster, NY
Read More...

Moore’s Ideal Products (MIP) Video Testimonial

Challenge: Needed a way to automate machining without losing tolerances.
Machining Solution: BS series machines
Result: Running 5 days a week, 8 hours a day instead of 2 10 hour shifts, 4 days per week.
Location: Covina, CA
Read More...

MacKay Manufacturing reaps the benefits of ESPRIT on Tsugami Machines – Video Testimonial

Challenge: Trouble running a challenging part complete.
Machining Solution: SS38MH-5AX, B0326
Result: Able to run their part in 1 op, under 3 minutes.
Location: Spokane, WA
Read More...

Azimuth Technology Video Testimonial

Challenge: Needed a solution that could run unattended with a compact footprint
Machining Solution: B0125, SS20, B0206
Result: High tolerances, low cycle times on unattended Tsugami Swiss machines
Location: Naples, FL
Read More...

Precision Plus Video Testimonial

Challenge: Remove cycle time and run continuously.
Machining Solution: SS20, SS327-5AX, S205
Result: Unattended operations - lights out machining.
Location: Elkhorn, WI
Read More...

Angstrom Manufacturing

Challenge: One stop shop for complete, finished parts
Machining Solution: Tsugami S206
Result: Decreased cycle times to 20 seconds
Location: Bloomsdale, MO
Read More...

APS Plastics & Manufacturing

Challenge: Traditional CNC equipment was used with a legacy approach
Machining Solution: Tsugami B0205-III
Result: Cut production time from 2 minutes to 23 seconds
Location: Tomball, TX
Read More...